cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1766
Views
0
Helpful
3
Replies
phipham-equens
Beginner

Cisco ACS 5.3 - Radius attributes and 'Device Administration/Shell Profiles'

Can anyone help me with the following ?

Under 'Policy Elements/Authorization and Permissions/Network Access/Authorization profiles' I have defined a profile and the following Attribute:
Attribute = F5-LTM-User-Role
Type = Unsigned Interger 32
Value = 300.

My question is:
How can I define the same as above using 'Device Administration/Shell Profiles' ?

There is a Custom Attributes tab but I cannot figure out how to specify the 'Type' field. (Under Custom Attributes tab there is only space for 2 fields and not 3 fields).

1 ACCEPTED SOLUTION

Accepted Solutions
Tarik Admani
Advocate

Hi

Just for my understanding are you trying to use tacacs or radius?

Shell profiles are used for tacacs and authorization profiles are used for radius.

Thanks

Tarik

View solution in original post

3 REPLIES 3
Tarik Admani
Advocate

Hi

Just for my understanding are you trying to use tacacs or radius?

Shell profiles are used for tacacs and authorization profiles are used for radius.

Thanks

Tarik

View solution in original post

Thanks for your help !

(I use Radius for access to a device).

Not a problem, please do not forget to mark this as resolved so future users will be able to find this was resolved.

thanks,

Tarik Admani
*Please rate helpful posts*

Create
Recognize Your Peers
Content for Community-Ad

ISE Webinars



Did you miss a previous ISE webinar?

CiscoISE YouTube Channel