Cisco ACS 5.4 Eval on Vmware Workstation demo

[gregory wenzel]

I have a project to review CISCO ACS v5.4 for my client, not having a real ESxi server i opted using workstation.

I have the vm built using 150gb file and am able to run the setup for domain and ip addressing as well as firewall settings and services.

using a c2811 for ntp source and routing to other laptops in my lab.

I am unable to web into the acs server to access anything

Can someone please point me in the right direction on what I am missing besides an actual ESXi server.

Regards,

[gregory wenzel]

forgot to mention that I can ping everywhere and everything. Have DNS and AD server running and nslookup on the demo laptops all work. I can telnet and ping to everything as needed.

[gregory wenzel]

Followed this thread and I think i have it, its in process and hopefully i can get it going.

https://supportforums.cisco.com/message/3714114#3714114

[kaaftab]

The problem might be due to the fact you are running the EXi in NAT mode .Just try bridging the network .