Cisco acs 5.4

[Daryn Utesbayev]

Hello everyone!

I would like to introduce my issue. At work we connected to acs 5.non cisco devices (zyxel, zte,Alcatel.) via tacacs+ protocol.

I tried to give them readable without privileges. I mean with attribute. But I couldn't do it. If someone knows please post to me.

If its not possible with protocol tacacs+  how I can do with radius protocol?

[Chris Illsley · Accepted solution]

It's not really possible to tell you how, where TACACS hadles authentication and authorization different devices handle authorization attributes diffeently, you need to refer to the documentation for your devices to find what can and can't be done.

Thanks

Chris

[Daryn Utesbayev]

Thanks Chris

[Jatin Katyal]

Hi Daryn,

Have you tried the below listed configuration for alcatel/tacacs.

You may also refer the below listed link for

TACACS+ and RADIUS Attributes for Various Cisco and Non-Cisco Devices Configuration Example

http://www.cisco.com/en/US/products/ps9911/products_configuration_example09186a0080bf5512.shtml#asr

~BR
Jatin Katyal

**Do rate helpful posts**

[Daryn Utesbayev]

Hi Jatin

I haven't tried it  becouse the alcotel devices supports only radius protocol.

Thank you for helping!!!