07-22-2013 03:58 PM - edited 03-10-2019 08:41 PM
Hi,
I have a big issue with my ise appliance configured with the last version, which is 1.1.4
I have configured one network device but she doesn't want communicate with ise. The radius communication doesn't works.
In fact, we see when we do "sh ports" on the ise that the radius port are not open.
I ever installed one ise appliance in 1.1.3 and it works.
A idea ????? please
thanks for advanced
07-22-2013 07:58 PM
Any recent changes you are aware of in your setup?
Can you attach the output of show ports.
Have you tried reloading the ISE box?
Did you simply upgrade the ISE box from 1.1.3 to 1.1.4 or you reimaged/restore the database?
~BR
Jatin Katyal
**Do rate helpful posts**
07-22-2013 10:58 PM
Hi,
Can you post the output of your show ports? Also is this in a distributed setup or is this a standalone node.
here are the port information on my psn -
udp: 10.250.250.183:58626, 10.250.250.183:1812, 10.250.250.183:1813, 10.250.250.183:1700, 0.0.0.0:60599, 10.250.250.183:3799, 10.250.250.183:1645, 10.250.250.183:1646,
From my admin node -
10.250.250.185:1700, 10.250.250.185:3799, 10.250.250.185:64217, 0.0.0.0:20057, 0.0.0.0:50140
If this is a standalone node, can you go to the deployment section and make sure that all checkboxes are selected, in particular the third box "Policy Service"
Tarik Admani
*Please rate helpful posts*
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide