cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

284
Views
0
Helpful
1
Replies
silla
Beginner

Cisco ISE 2.4 appliance synchronization question

Hello,

I'm trying to add a secondary PAN/MNT/PSN to a primary appliance, but initial sync fails; my customer wants to use the GigabitEthernet1 interfaces for syncing, which are the ones pointed to by forward and reverse DNS entries. Is perhaps GigabitEthernet0 the only interface that can be used for this?

 

Thanks

Best regards

Silla

1 ACCEPTED SOLUTION

Accepted Solutions
Colby LeMaire
VIP Collaborator

Management services are restricted to Gig0 on all versions of ISE.  Following is the 2.7 installation guide and ports reference that states this:  https://www.cisco.com/c/en/us/td/docs/security/ise/2-7/InstallGuide27/b_ise_InstallationGuide27/b_ise_InstallationGuide27_chapter_0110.html

 

View solution in original post

1 REPLY 1
Colby LeMaire
VIP Collaborator

Management services are restricted to Gig0 on all versions of ISE.  Following is the 2.7 installation guide and ports reference that states this:  https://www.cisco.com/c/en/us/td/docs/security/ise/2-7/InstallGuide27/b_ise_InstallationGuide27/b_ise_InstallationGuide27_chapter_0110.html

 

View solution in original post

Content for Community-Ad