01-29-2020 06:06 AM
Hello,
I'm trying to add a secondary PAN/MNT/PSN to a primary appliance, but initial sync fails; my customer wants to use the GigabitEthernet1 interfaces for syncing, which are the ones pointed to by forward and reverse DNS entries. Is perhaps GigabitEthernet0 the only interface that can be used for this?
Thanks
Best regards
Silla
Solved! Go to Solution.
01-29-2020 10:12 AM
Management services are restricted to Gig0 on all versions of ISE. Following is the 2.7 installation guide and ports reference that states this: https://www.cisco.com/c/en/us/td/docs/security/ise/2-7/InstallGuide27/b_ise_InstallationGuide27/b_ise_InstallationGuide27_chapter_0110.html
01-29-2020 10:12 AM
Management services are restricted to Gig0 on all versions of ISE. Following is the 2.7 installation guide and ports reference that states this: https://www.cisco.com/c/en/us/td/docs/security/ise/2-7/InstallGuide27/b_ise_InstallationGuide27/b_ise_InstallationGuide27_chapter_0110.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide