cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1573
Views
0
Helpful
3
Replies

Cisco ISE 2.4 Patch5 Dynamic Authorization failed

tnt_network
Level 1
Level 1

Hi! 

I have some problem with dynamic authorization.

The problem involved is similar to CSCvi28819.

But there are some differences.

First of all, I have no PxGrid.

 

I have Node Group of two Policy Service Servers.

Passive ID with Active Directory connection.

When the COA issued by primary node - Calling-Station-Id is correct MAC-address. All is OK!

When the COA issued by secondary node - Calling-Station-Id is an IP-Address and "Dynamic Authorization failed" error occured. Error-Cause: "Session Context Not Found"

 

Is there solution of this problem?

wbr Mikhail.

1 Accepted Solution

Accepted Solutions

Yes, passiveID enabled on both nodes.
Thank a lot. I raised TAC SR yesterday.

View solution in original post

3 Replies 3

howon
Cisco Employee
Cisco Employee

Is passiveID enabled on box nodes? It sounds like session retrieved from MnT session table isn't functioning correctly. I suggest raising a TAC SR for this for RCA.

Yes, passiveID enabled on both nodes.
Thank a lot. I raised TAC SR yesterday.

Can you please share with us what was the issue?