cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

484
Views
0
Helpful
1
Replies
aslam.bajwa
Participant

cisco ISE 2.4 - Ports status Drop

HI All , 

 

i have added i new Switch 9300 in our ISE deployment , Switch connectivity is success fully tested .

when i apply the ISE configuration on Switch Port , end-point not taking IP add from DHCP .

 

1- and show mac add-table int gi 3/0/13 ----out showing Ports status Drop

 

2 - End-point is working after removing the ISE configuration from switch port 

 

interface GigabitEthernet3/0/13
description ***ISE Project TEST MACHINE **
switchport mode access
authentication event fail action next-method
authentication event server dead action authorize vlan 1
authentication event server dead action authorize voice
authentication event server alive action reinitialize
authentication host-mode multi-domain
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication timer inactivity server
authentication violation protect
snmp trap mac-notification change added
snmp trap mac-notification change removed
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast 

 

Please advise 

 

 

 

1 REPLY 1
Jaderson Pessoa
VIP Collaborator

Could you share ISE logs for this device?
Jaderson Pessoa
*** Rate All Helpful Responses ***
Content for Community-Ad