02-25-2014 11:23 AM - edited 03-10-2019 09:27 PM
Hi Dears,
I have two ISE devices. One of them sofware is 1.1.1.268 and one of them is 1.2.0.899. Now i want upgrade ISE 3315 software 1.1.1268 to 1.2.0.899.
How can I do that?? Please help me.
02-25-2014 11:44 AM
First of all, you'll need the file ise-upgradebundle-1.1.x-to-1.2.0.899.i386.tar.gz
After downloading, simply follow these instructions:
02-25-2014 12:23 PM
First, Create a repository in the ISE WebGUI by going to Administration > System > Maintenance and clicking Repository on the Left Menu:
Click the +Add button and then fill out the configuration for the repository:
Note that my repository name is Upgrade.
Download the ise-upgradebundle-1.1.x-to-1.2.0.899.i386.tar.gz file and place it in the location you configured in your repository.
Perform a backup of your ISE.
Install the latest patches for v1.1.1
Log in to the CLI and issue the following command:
application upgrade ise-upgradebundle-1.1.x-to-1.2.0.899.i386.tar.gz Upgrade
Wait.Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton
02-27-2014 07:19 AM
thank you very much.
Must I install a latest patch?? Which FTP program do you recomendate?
Thanks
02-27-2014 07:31 AM
Teymur,
You must have Patch 6 installed for v1.1.1 as a minimum. As there are only 7 patches and they are cumulative, just install patch 7 and go from there. Here is the upgrade guide:
For ease of use, I like FileZilla for an FTP Server. This is not a recommendation, just what I use personally. Use whichever program you want, I just happen to like this one.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton
02-27-2014 08:09 AM
before upgrade i must install patch 7 as i understand and how do install this patch?
thanks
02-27-2014 08:58 AM
Navigate to Administration > System > Maintenance, choose Patch Management from the Left Menu.
Click Install, browse for the patch file on your PC, click Install. ISE will restart during this patch installation.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton
02-27-2014 10:21 AM
Hi teymur azimov,
Please download ise-patchbundle-1.1.1.268-7-87515.i386.tar.gz from www.cisco.com site and you can make use of GUI option (as said in above replies) to install this patch on ISE 3315 node which has ISE version 1.1.1.268. If you are unable to get the file ise-patchbundle-1.1.1.268-7-87515.i386.tar.gz then please raise a request with TAC and they will provide you the file
ise-patchbundle-1.1.1.268-7-87515.i386.tar.gz for installation.
After successful installation of ise-patchbundle-1.1.1.268-7-87515.i386.tar.gz please run the upgrade option as shown in replies.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide