Cisco ISE generate license for high availability primary/secondary nodes

[teymur azimov]

Hi dears,

I have 2 physical Cisco ISE devices. I want to deploy high availability. So I want to know that how many license needed? Do I need two seperate license for each devices??

Thanks.

[cciesec2011]

You only need one license:

1- build the primary Admin/MNT/PSN node,

2- buidl the Secondary Admin/MNT/PSN node,

3- go to www.cisco.com/license and register the device in step #1 using the serial # o fthe primary node,

4- go to the primary Admin WebUI and attach the license obtain in step #3,

Simple right?

[Aishwarya Srivastava]

We need only one license. You can go through the following link:

http://www.cisco.com/c/en/us/products/collateral/security/identity-services-engine/app_note_c27-726643.html

[Saurav Lodh]

You dont need! Please follow the instruction from below link , how to generate the license file

http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/installation_guide/ise_ig/ise_app_d_man_license.html

[Venkatesh Attuluri]

Cisco ISE licenses are specific to a deployment and not to individual appliances in the deployment.