03-02-2022 08:21 AM
I am planning to restore a backup of Cisco ISE to a new VM. The backup is of a VM that is in HA mode.
What will happen if I restore a backup from HA setup to a non HA VM? Does it stay as non HA VM?
Solved! Go to Solution.
03-02-2022 08:58 AM
Hi @dnnate ,
remember that ... when you restore the Configuration Backup without restoring ADE-OS, the Node will be a Standalone Node without the OS Configuration Data of the ISE Server the backup was taken from (like hostname, IP Addr, NTP, ...).
Note: restoring ADE-OS you will have an exact duplicate of the ISE Server the backup was taken from.
Hope this helps !!!
03-02-2022 08:23 AM
yes you can restore offline mode and check, is the other VM in HA still working ?
03-02-2022 08:25 AM - edited 03-02-2022 03:25 PM
Yes, both VMs in HA are working. We intend to replace them with the new one, once fully configured. The new VM will have a new hostname
03-02-2022 08:36 AM
you can offline prepare.
03-02-2022 08:58 AM
Hi @dnnate ,
remember that ... when you restore the Configuration Backup without restoring ADE-OS, the Node will be a Standalone Node without the OS Configuration Data of the ISE Server the backup was taken from (like hostname, IP Addr, NTP, ...).
Note: restoring ADE-OS you will have an exact duplicate of the ISE Server the backup was taken from.
Hope this helps !!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide