Cisco ISE sending logs to NXLog

[Desmond Lee]

Hi, is it possible to send logs from Cisco ISE (version 3.0) to NXLog ?

I know nothing about NXLog, but see that they have some kind "agents" stuff.

Will it be as simple as pointing to the NXLog server IP, or do I need to install anything at ISE ?

Thanks,

Desmond

[balaji.bandi]

You need to configure ISE to send logs to remote log server as below :

Administration > System > Logging > Remote Logging Targets.

https://www.cisco.com/c/en/us/td/docs/security/ise/3-0/admin_guide/b_ISE_admin_3_0/b_ISE_admin_30_troubleshooting.html