- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-21-2013 02:23 PM - edited 03-10-2019 08:13 PM
I made a mistake configuring the domain-name on my ISE appliance. I issued to the no ip domain-name and then added the domain-name I'd like to show up. It seems to have partially worked, as the FQDN on the appliance is now correct but the redirect URL on my wireless LAN controller is still redirecting to the old domain.
EX: WLC redirect: ise1.xyz.net
ISE FQDN: ise1.abc.net
Any ideas on how to change that?
Solved! Go to Solution.
- Labels:
-
AAA
Accepted Solutions

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-21-2013 02:54 PM
The FQDN is taken from the CN of the server certificate assigned for HTTPS

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-21-2013 02:54 PM
The FQDN is taken from the CN of the server certificate assigned for HTTPS
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-21-2013 02:58 PM
Thank you that did it, appreciate your help.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-22-2013 01:54 AM
Although you have changed the domain-name on the ISE appliance but still the output on WLC shows the older domain for url redirect.The reason behind is that the domain name(FQDN) which is present as the common name(CN) on the certificate of the server is still the old-domain name.
