Cisco ISE URL Redirect Update

[David Boos]

I made a mistake configuring the domain-name on my ISE appliance.  I issued to the no ip domain-name and then added the domain-name I'd like to show up.  It seems to have partially worked, as the FQDN on the appliance is now correct but the redirect URL on my wireless LAN controller is still redirecting to the old domain. 

EX: WLC redirect: ise1.xyz.net

     ISE FQDN: ise1.abc.net

Any ideas on how to change that?

[jrabinow · Accepted solution]

The FQDN is taken from the CN of the server certificate assigned for HTTPS

[David Boos]

Thank you that did it, appreciate your help.

[vikasyad]

Although you have changed the  domain-name on the ISE appliance but still the output on WLC shows the  older domain for url redirect.The reason behind is that the domain  name(FQDN) which is present as the common name(CN) on the certificate of  the server is still the old-domain name.