cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2903
Views
0
Helpful
1
Replies

Cisco ISE USB port Blocking Problem!

s.maxina1
Level 1
Level 1

Hi All.

I have configured Cisco ISE Posture for blocking usb with Cisco any connect. with "AnyConnectDesktopWindows 4.3.5017.0" and "AnyConnectComplianceModuleWindows 4.3.795.6145" configuration, when plug usb device to USB port, the message "IT policy prohibits the use of usb storage devices." is shown, but still we can open the usb drive and see all files. it also noted that the network access is disconnected in this case. 

thanks,

Sina HR.

1 Accepted Solution

Accepted Solutions

s.maxina1
Level 1
Level 1

 After installation of KB2533623 and KB3033929 Microsoft Update, problem resolved.

 

 

View solution in original post

1 Reply 1

s.maxina1
Level 1
Level 1

 After installation of KB2533623 and KB3033929 Microsoft Update, problem resolved.