cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

475
Views
0
Helpful
1
Replies
Highlighted
Beginner

Cisco ISE USB port Blocking Problem!

Hi All.

I have configured Cisco ISE Posture for blocking usb with Cisco any connect. with "AnyConnectDesktopWindows 4.3.5017.0" and "AnyConnectComplianceModuleWindows 4.3.795.6145" configuration, when plug usb device to USB port, the message "IT policy prohibits the use of usb storage devices." is shown, but still we can open the usb drive and see all files. it also noted that the network access is disconnected in this case. 

thanks,

Sina HR.

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Re: Cisco ISE USB port Blocking Problem!

 After installation of KB2533623 and KB3033929 Microsoft Update, problem resolved.

 

 

View solution in original post

1 REPLY 1
Highlighted
Beginner

Re: Cisco ISE USB port Blocking Problem!

 After installation of KB2533623 and KB3033929 Microsoft Update, problem resolved.

 

 

View solution in original post