Cisco Nexus Dashboard Tacacs Configuration with Cisco ISE

[wavarevivek1]

Hi All,

Recently I have configured the Tacacs for the Cisco ACI Febric (APIC & Leaf) with Cisco ISE.

I have used the link - https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-32/220433-configure-apic-for-device-administration.html for the referance.

We also have Nexus Dashboard and I am looking for a guid document where I can get the Cisco ISE side configuration for Tacacs Profile "cisco-av-pair" for the Nexus Dashboard tacacs login.

Can anyone help me out on the configuration part of the Cisc ISE side.

[Greg Gibbs · Accepted solution]

A simple Google search found this:
https://www.cisco.com/c/en/us/td/docs/dcn/nd/2x/user-guide-23/cisco-nexus-dashboard-user-guide-231/administrative.html#_adding_radius_or_tacacs_as_remote_authentication_provider

[wavarevivek1]

Hi Greg,

I already checked this document.

The requirement I have is the configuration in Cisco ISE Side.

I want the cisco-av-pair for NX - dashboard

I found this for cisco ACI and it is working fine.

• Admin User: cisco-av-pair=shell:domains=all/admin/
• Read Only Admin User: cisco-av-pair=shell:domains=all//read-all

[wavarevivek1 · Accepted solution]

Hi Greg,

I tried the same cisco-av-pair and it workes for NX-dashboard as well.

Thanks for the support.