cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4931
Views
2
Helpful
1
Replies

Compliance Posturing in C9800-CL WLC using ISE

Kindly provide document for configuration steps to do compliance check (posturing) on wireless network.

We are using C9800-CL WLC and ISE

1 Accepted Solution

Accepted Solutions

Greg Gibbs
Cisco Employee
Cisco Employee

See the Wireless Posture with ISE 3.0 and AnyConnect 4.9  document for guidance on general Posture configuration for Wireless using an AireOS-based WLC.

You can use the CWA on Catalyst 9800 Wireless Controllers and ISE Configuration Example  document to see how to configure the comparable IOS-XE-based Cat9800 WLC settings like SSIDs, RADIUS servers, URL redirect ACLs, etc.

View solution in original post

1 Reply 1

Greg Gibbs
Cisco Employee
Cisco Employee

See the Wireless Posture with ISE 3.0 and AnyConnect 4.9  document for guidance on general Posture configuration for Wireless using an AireOS-based WLC.

You can use the CWA on Catalyst 9800 Wireless Controllers and ISE Configuration Example  document to see how to configure the comparable IOS-XE-based Cat9800 WLC settings like SSIDs, RADIUS servers, URL redirect ACLs, etc.