Compliance Posturing in C9800-CL WLC using ISE

[IshwarBamane2910]

Kindly provide document for configuration steps to do compliance check (posturing) on wireless network.

We are using C9800-CL WLC and ISE

[Greg Gibbs · Accepted solution]

See the Wireless Posture with ISE 3.0 and AnyConnect 4.9  document for guidance on general Posture configuration for Wireless using an AireOS-based WLC.

You can use the CWA on Catalyst 9800 Wireless Controllers and ISE Configuration Example  document to see how to configure the comparable IOS-XE-based Cat9800 WLC settings like SSIDs, RADIUS servers, URL redirect ACLs, etc.