configure cisco switch 3850 and add to ISE

[gl_al]

Hi All !!

I have server ISE and use  as radius server, add to ISE and configured on the switch 2960 802.1 x and MAB authentication, but not  understand how to make it on the switch 3850. What is the difference(feature) between the configuration  switch 2960 and 3850 ?

[paul]

Depending on the version of code on the 3850 and if the switch has been converted to new-style format there should be no difference.  The same legacy template should work on both switches.  If you have converted the switch to new-style format (CPL) you will need to reference the IBNS 2.0 guides or other guides to configure the switch.

[thomas · Accepted solution]

Please read the ISE Wired Access Deployment Guide for details.

Should have what you need.

[gl_al]

Thank you all for the links,  already read and I think I can configure correctly.