Configuring AAA

[fernandacouto]

Hi,

Can anyone help me? I'm trying to implement RADIUS authentication for my Cisco switches and routers. Could anybody give me some configuration examples or a tip of how to point my switches and routers at a RADIUS server, and also to attempt authentication against RADIUS. Only using a locally configured account if RADIUS fails?

I have tryed the con following configuration but I'm not shure if that is correct:

aaa new-model

aaa authentication login default group radius local

aaa accounting network default init-stop group radius

radius-server host 10.132.100.1 auth-port 1812 acct-port 1813 key ciscosecure

radius-server retransmit 3

Thank you,

Fernanda

[sourabhagarwal]

hope this URL will give you some clue.

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00804ec61e.html

rate if it helps ....

[Richard Burts]

Fernanda also posted this same question in the AAA forum where it has gotten a couple of responses. I suggest that we consolidate the discussion in that forum.

HTH

Rick