Copy ISE image from USB to local disk

[NetworkMonkey101]

What is the command to copy from an inserted usb to local disk or flash for ISE SNS node?

[NetworkMonkey101]

Used this command but prompting for username...

dc-pxg-01/admin#copy disk:/usb1/ise-upgradebundle-3.0.x-3.2.x-to-3.3.0.430b.SPA.x86_64.tar.gz flash:
Enter username:

[NetworkMonkey101]

USB into node is not showing tried "show usb drives" no command.

Also USB is in NTFS as FAT32 gives error when copying file to it..

I am unable to copy images by repo as 14gb file times out constantly so thought I could copy by usb manually then initiate upgrade once nodes each have IOS on them..