cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3957
Views
6
Helpful
3
Replies

DACL Download Failed

Fatoumata Sow
Level 1
Level 1

Hi,

We need your help.

I get this error when I try to configure Authorization policy from Cisco ISE:

5419 DACL Download Failed
Failure Reason11025 The Access-Request for the requested dACL is missing a cisco-av-pair attribute with the value aaa:event=acl-download. The request is rejected

 

The NAD is WS-C3560G-24PS-S and IOS version is : C3560 Software (C3560-IPBASEK9-M)

Do you think that is a compatibily issue ?

 Regards,

1 Accepted Solution

Accepted Solutions

Glad to hear that the issue was resolved and thank you for taking the time to come back and confirm the solution (+5 from me). 

If your issue is resolved, please mark the thread as "answered" :)

Thank you for rating helpful posts!

View solution in original post

3 Replies 3

nspasov
Cisco Employee
Cisco Employee

The 3560G is fully compatible. Usually this is caused by a typo in the dACL. Double check that and perhaps post the syntax here. 

 

Thank you for rating helpful posts!

Thank you for rating helpful posts!

Hi Neno,

 

thank for your reply. As you suggested, after checking I had forgotten some commands :)

Now it works.

 

Glad to hear that the issue was resolved and thank you for taking the time to come back and confirm the solution (+5 from me). 

If your issue is resolved, please mark the thread as "answered" :)

Thank you for rating helpful posts!