12-29-2014 04:47 AM - edited 03-10-2019 10:18 PM
Hi,
We need your help.
I get this error when I try to configure Authorization policy from Cisco ISE:
5419 DACL Download Failed | |
Failure Reason | 11025 The Access-Request for the requested dACL is missing a cisco-av-pair attribute with the value aaa:event=acl-download. The request is rejected |
The NAD is WS-C3560G-24PS-S and IOS version is : C3560 Software (C3560-IPBASEK9-M)
Do you think that is a compatibily issue ?
Regards,
Solved! Go to Solution.
12-31-2014 09:07 AM
Glad to hear that the issue was resolved and thank you for taking the time to come back and confirm the solution (+5 from me).
If your issue is resolved, please mark the thread as "answered" :)
12-29-2014 08:53 AM
The 3560G is fully compatible. Usually this is caused by a typo in the dACL. Double check that and perhaps post the syntax here.
Thank you for rating helpful posts!
12-31-2014 01:29 AM
Hi Neno,
thank for your reply. As you suggested, after checking I had forgotten some commands :)
Now it works.
12-31-2014 09:07 AM
Glad to hear that the issue was resolved and thank you for taking the time to come back and confirm the solution (+5 from me).
If your issue is resolved, please mark the thread as "answered" :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide