This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC!
We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.
Hi Experts,
We have to ACS cisco Box running software as 4.2 & 5.2. We want to upload all the data present in 4.2 ACS to 5.2 ACS.
Pl's provide me all the steps that i should follow , with the tool i should use for backup.
Regards,
Surya.
Solved! Go to Solution.
Hi,
You will need the migration utility in order to guide through the process, is the ACS an appliances or does it currently run on windows?
Here is a link to get you started -
The steps you will need are as follows:
You will need a migration machine (windows server running the same version and patch of your current ACS).
Using the above link pull the migration file (do not use RDC use VNC it will only work this way)
You will follow the above guide to turn on the migration interface of the ACS through the cli.
Follow the steps through the migration guide and it should go just fine.
Thanks
Tarik Admani
If you have an appliance you need to have ACS on windows also as a migration machine.
Take backup on the appliance, restore it on the windows ACS (must be same version and patch as the appliance) and then run the migration tool
HTH
Amjad
Sent from Cisco Technical Support iPad App
Hi,
You will need the migration utility in order to guide through the process, is the ACS an appliances or does it currently run on windows?
Here is a link to get you started -
The steps you will need are as follows:
You will need a migration machine (windows server running the same version and patch of your current ACS).
Using the above link pull the migration file (do not use RDC use VNC it will only work this way)
You will follow the above guide to turn on the migration interface of the ACS through the cli.
Follow the steps through the migration guide and it should go just fine.
Thanks
Tarik Admani
HI Tarik,
Thnaks for information
ACS an appliance , so Pl's provide information regading that.
If you have an appliance you need to have ACS on windows also as a migration machine.
Take backup on the appliance, restore it on the windows ACS (must be same version and patch as the appliance) and then run the migration tool
HTH
Amjad
Sent from Cisco Technical Support iPad App
link does not work
looks like there is some temp. issue and try after sometime.
you may try now, its working fine.
Jatin Katyal
- Do rate helpful posts -