Details about data exchange between Secure ACS and Novell NDS

[o.umudumov]

Hi!

We are planning to implement Secure ACS authentication with Novell NDS.

But our Novell Admin is very concerned about the way ACS will communicate with NDS.

ACS needs Administrator rights to get linked to NDS database and it is something we should know about.

So my question is if it is possible to get detailed information about this communication, like will ACS write something or is it read only etc.. etc..

If someone had some big troubles after ACS did connect to NDS - this info would be also great.

Thanks to all in advance.

Regards

Orest

[ciscomoderator]

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you, or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources at the online http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.