dialup for isdn bri

[manivelindian]

how do i configure the authentication for isdn bri as a dialup in cisco routers without radius server?

can i cofigure all the authentication in cisc router?

[Lucien Avramov]

Check the links:

ISDN Configuration Example - IP :

http://cisco.com/en/US/tech/tk801/tk379/technologies_configuration_example09186a0080094091

.shtml

Sample Configuration: Basic ISDN Configuration :

http://cisco.com/en/US/tech/tk801/tk379/technologies_configuration_example09186a0080094abd

.shtml

You can configure pap, chap for example.

Is that what you are looking for?

[manivelindian]

thank u very much for posted the above links.

actually my purpose is to use this isdn bri as a dialup for remote side clients.

whenever a clients dial this bri no by using analog modem, then the clients will get an ip from this local pool in cisco routers.This is our concept.

i configured this isdn bri in cisco router without seperate radius server for authentication.

now all the clients authenticating via cisco router itself.

all the clients logging in successfully.

i configured username and password in cisco router.

thanks alot.