EAP-TLS on ACS 5.3

[tom916599]

I have a requirement to set up wireless connectivity from iOS devices using EAP-TLS via Cisco WLC using dot.1x, acting as the supplicant ant authenticating against ACS 5.3. I've used a mobile device manager to deliver certificates and wireless profile to the Mobile devices, and i've configured the WLC for dot.1x but I'm looking for a good Cisco step by step document for setting up the ACS 5.3. Any help appreciated

Sent from Cisco Technical Support iPad App

[Amjad Abdullah]

I am not aware about any step by step guide.
But what you can do is:

- Install the needed certificates.

- configure the policy elements.

- Make sure that the policy allow EAP-TLS.

Look into this doc:

https://supportforums.cisco.com/docs/DOC-21679

This doc is for PEAP configuration while the integration is with windows AD.

The change you need to take is that you need to allow EAP-TLS rather than PEAP. Also, if AD is not in use you can choose internal users instead.

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"

[vikasyad]

Please review the below links which might be helpful:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/eap_pap_phase.html

https://supportforums.cisco.com/thread/2118525