Easy VPN user logins and Tacacs+.

[abhisar patil]

Dear All,

This is regarding with Easy VPN user logins and Tacacs+.

As per current setup, we are using local logins configured on router to allow remote vpn users to connect it.

Now we want use Tacacs+ to authenticate the users for accounting them.

So please provide me any configuration example or any doc or link for reference.

Abhisar.

[Tarik Admani]

Abhisar,

Let me know if these are the guides you are looking for: Secure Unit Authentication -

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/vpngrp.html#wpxref91833

or

Configuring Automatic Xauth Authentication -

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/ezvpn505.html#wp1010896

I found both of these references in the Authentication options section in the Easy VPN configuration guide -

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/ezvpn505.html#wp1015774

Thanks,

Tarik Admani

[abhisar patil]

Thanks Tarik for your reply,

Actually I am looking for authentication of VPN users configured on Router as we are using Cisco 2821 as a Easy VPN server not ASA.I think you have given ASA guides.Please if possible please provide Guide for a router.

Thanking you,

Abhisar.

[Tarik Admani]

Give these a shot - here is the command reference guide -

http://www.cisco.com/en/US/products/ps6350/prod_command_reference_list.html

Here is a configuration example -

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080808395.shtml#ts1

The command I am referring to is crypto map client authentication list

                                                crypto map client authorization list