eDirectory Authenication on PIX 7.1

[pkrekelberg]

Hi Guys

I've just upgrade your PIX 515E to pix 7.1. Seeing that version 7.x does not support pptp, I'm attempting to rollout the Cisco VPN client. During the vpn configuration it indicates that the can do AAA via LDAP.

When I try to test the authenication, I don't see the username/password on the ldap console screen. Is there something special I need to do to set this up.

Thanks

Paul

[mchin345]

Here is a useful document that speak about AAA and LDAP configuration on Pix .

http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_70/config/

If you still find any problem, let me know the following informations.

1. your network topology

2. The aaa configuration you have made via LDAP.