Network Access Control

I have just inherited a corp network that uses a PIX 515e at each of three sites to create site-to-site VPN tunnels. This is working fine. I need to setup remote VPN access for individual users using the PIX at our main office. Is it possible to use ...

Is it possible to use the local authenticator feature on a 3845 to authenticate, let's say, vty access to a remote router?Or dialup accesses?TIA.

Weird problem. I would like to delete some dynamic mapped user in the database. But there is delete button, instead the acs said the user is new...Any input is very welcomeOliver

I am trying to use a single ACS server to authenticate SSL users AND to authenticate management access. It seems that external user authentication can be done with almost any flavor EXCEPT tacacs. However, it seems that management access can be don...

Hi all,we have an ACS server (3.3)which we use for Login and Enable authentication for all our routers & switches without any problems.I am setting up an Aironet 1231G with IOS 12.3(7)JAI am able to get the login to authenticate OK, but when you try ...

I am having a problem trying to modify the group settings. When I click the group setup setting from the left panel I go to the next screen and can use the pull down menu to select a group to modify, but when I try and click the edit group option, I ...

I am using Cisco Secure ACS Engine 3.3 and a router to perform autentication.Now the router is providing to the users the IP from an IP pool. I can see in logged-in users the number of users currently connected, but i can't see the IP that the user h...

Hi,I have ACS 3.3, & CISCO 2620 routers.Users will dial-in to the CISCO 2620 routers through PSTN line. The routers act as AAA clients. I would like to know how to enahnce the connection between routers & end-user machines. Can I configure 3DES & DES...

Hi,I have tacacs+ set up on ACS 3.3I have a few boxes authenticating in tacacs - a PIX (6.3(5)), a 3745 (IOS 12.3(9)), and 3 6509s (CatOS 7.6(7))I've managed to get accounting records in ACS for logins to the 3745 & a 6509.But I can't seem to get acc...

Hi,we currently run ACS 2.6(4) on NT Server! We need to upgrade to 2k3 Server and ACS 3.3! So I installed 2K3 on new hardware and try to install ACS 2.6 to the machine to replicate the DB with existing database! But i am not able to install 2.6 to Wi...

Is it possible to assign PIX user access level 15 with TACACS?

Hello All,Never seen this behaviour from a tacacs+ server before. can someone who had a change to fix this help me here.show tacServer: x.y.z.w/49: opens=11 closes=11 aborts=0 errors=0 packets in=11 packets out=11 timeout=0 connection_fails=0 ...

Hello,pls which service is actually suspended when the AAA server gives this report."Service CSAuth has been stopped or paused by the system. Monitoring will suspend until the service is restarted."And how can I resolve it. Also, my backup AAA server...

I'm trying to find a way of authenticating and authorizing users logging on to a Cat6500 in hybrid mode, such that once a user logs on, enters the SecurID passcode correctly and is authenticated, then the user goes straight to enable mode.We are usin...

HelloDoes anyone know if it is possible to assign IP addresses from an IP Address pool to a common username connected to the same NAS device multiple times?The scenario is that there are multiple GPRS devices with a "common" configuration connecting ...