02-19-2021 02:33 AM
Hello everybody.
At the moment I have a cluster with only a MnT Primary role on the secondary Pan.
I would enable it also on the Primary Pan as Secondary MnT.
I'm wondering if after enable it and the Primary Pan restarted the services, it sync automatically with the MnT Primary/Secondary Pan.
It's true?
Thanks a lot.
Americo
02-19-2021 03:03 AM
yes, you are correct, it syncs automatically.
You can use the following command:
show application status ise
and take a look at the following process when you activate the Sec MnT .. from disabled to running:
M&T Session Database
M&T Log Processor
Hope this helps !!!
02-19-2021 03:23 AM
Hello Marcelo, thanks as usual.
02-19-2021 09:46 AM
There is also a method to check if the sync it's over?
From the deployment status I'm not seeing anything about the sync process
02-19-2021 10:55 AM
yes, on Administration > System > Deployment, take a look at the Node Status icon and the icon marked bellow:
Hope this helps !!!
02-19-2021 02:56 PM
There are two things to consider here.
Enabling the MNT role on the other node starts the MNT log collection from zero. While you can backup the operation logs from the existing MNT, and restore them to the new MNT, I do not recommend doing this unless there is some specific need. By default the MNTs store 30 days of logs, after a month, both nodes will have the same 30 days of logs barring some kind of problem with the deployment.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide