09-13-2023 08:28 AM
getting error on Cisco catalyst switch WS-C2960X-24PS-L and C2960X-UNIVERSALK9-M version15.2(4)E6 as :
000371: Sep 13 19:38:28.109: EPM_PLUGIN_REDIRECT_ERR: ACE item addition onto the interface failed either
due to lack of memory, syntax error or the ACE already exists
000372: Sep 13 19:38:28.109: EPM_PLUGIN_REDIRECT_ERR: [0c37.9678.40ba, Gi1/0/1] Could not apply URL Redirect ACL REDIRECT
This error is coming on while integrating ISE with Cisco catalyst switch . Need urgent help
Could not take TAC assistance as the switches are out of support
09-13-2023 09:30 AM
not that i have observed this error ? what is the switch uptime ? and is the memory usage ?
how is your config looks like ?
if this is effecting then you need to go back to old config which working until you test again and have solution.
09-13-2023 08:22 AM
getting error on Cisco catalyst switch WS-C2960X-24PS-L and C2960X-UNIVERSALK9-M version15.2(4)E6 as :
000371: Sep 13 19:38:28.109: EPM_PLUGIN_REDIRECT_ERR: ACE item addition onto the interface failed either
due to lack of memory, syntax error or the ACE already exists
000372: Sep 13 19:38:28.109: EPM_PLUGIN_REDIRECT_ERR: [0c37.9678.40ba, Gi1/0/1] Could not apply URL Redirect ACL REDIRECT
This error is coming on while integrating CPPM with Cisco catalyst switch . Need urgent help
Could not take TAC assistance as the switches are out of support
09-13-2023 10:08 AM
@Singh007 there is either not enough memory or the ACE syntax is incorrect, check both.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide