05-21-2013 06:47 PM - edited 03-10-2019 08:27 PM
Getting this error while trying to register a newly built standalone VM node on primary admin node.
'admin' is not authorized to register ISE Node <node name>. Please check the credentials and/or privileges.
admin is the only account on the newly built VM node and admin has full privileges on primary admin node as well. I have done the registering process before as well and this is the first time I have seen this error... Any thoughts?
Solved! Go to Solution.
05-27-2013 10:43 AM
Hello Kashish,
Though I assume its been almost a week's time and you might have solved this by now, but it may help others facing similar problem
When a node is registered with the primary, the primary node would connect with the node to be registered and the primary node itself needs to authenticate against that node which is to be registered.
You need to specify the Admin user password of the ISE node that you want to register. Make sure by logging on to the Web UI of the ISE node you want to register that you have the admin user password. Otherwise you should create / reset admin user for web UI of the node to be registered.
Regards,
Ashok
05-27-2013 10:43 AM
Hello Kashish,
Though I assume its been almost a week's time and you might have solved this by now, but it may help others facing similar problem
When a node is registered with the primary, the primary node would connect with the node to be registered and the primary node itself needs to authenticate against that node which is to be registered.
You need to specify the Admin user password of the ISE node that you want to register. Make sure by logging on to the Web UI of the ISE node you want to register that you have the admin user password. Otherwise you should create / reset admin user for web UI of the node to be registered.
Regards,
Ashok
10-15-2018 04:41 PM
this is an obvious answer
10-15-2018 04:44 PM
08-23-2021 12:49 PM - edited 08-23-2021 12:50 PM
Hello are you aware if the error could happen both vm are in trial?
Trying the test the setup before the production et i'm getting the error.
I've also try to add a new user on both server, with super admin privilege, still happening.
Version 3.1
11-29-2023 06:16 AM
did you find a solution?
11-29-2023 06:19 AM
I would really suggest making a new post on this topic. This thread is marked as solved and is 10 years (!!!!!) old....
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide