FortiSwitch 248E-POE , Integration with Cisco ISE

[salimalhinaai95]

Could anyone Write down step by step, how can we integrate FortiSwitch with Cisco ISE

[marce1000]

  - Ref: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/52554c36-064c-11ef-8c42-fa163e15d75b/FortiSwitch_Manager-7.2.4-Administration_Guide.pdf
         >...
         >The FortiSwitch unit supports using FortiAuthenticator, FortiConnect, Microsoft Network Policy Server (NPS), Aruba
ClearPass, and Cisco Identity Services Engine (ISE) as the RADIUS server for CoA and RSSO.

          I know the information is sparse, but essentially if you configure those you can use an ISE PSN as a radius server,

  M.

[salimalhinaai95]

yes, required Radius authentication in ISE, from fortiswitch everything is fine, we're only facing issue in ISE as it was showing (5400 Authentication failed) in live logs 

[marce1000]

 - @salimalhinaai95   The question then is : who or what is trying to authenticate ?

  M.