How to Configure ACS 5.6 for BYOD Integration with Radius authentication

[John]

We would like to know how to configure ACS 5.6 for BYOD Integration with Radius authentication ?

[Aditya Ganjoo]

Hi John,

May I know for which service are you using the Radius authentication for ?

Meanwhile, I would request you to go through the following documents:

http://www.cisco.com/c/en/us/support/docs/security-vpn/terminal-access-controller-access-control-system-tacacs-/10384-security.html#specaaa

http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/98594-configure-radius-authentication.html

Regards,

Aditya

Please rate helpful posts.

[John]

Hello Aditya,

Thank you for your prompt response. We are using this authentication when some user trying to connect in our wifi (ssid).

[Aditya Ganjoo]

Hi John,

You can check the following doc:

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/71989-manage-wlc-users-radius.html

http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/Unified_Access_Book/UA_Security.html#wp1253688

Regards,

Aditya

Please rate helpful posts.

[John]

Hello Adtya,

This link is applicable for 5.6?

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/71989-manage-wlc-users-radius.html

[Aditya Ganjoo]

Hi John,

You can check this third party doc which is applicable for ACS 5.6:

http://mrncciew.com/2014/05/11/wlc-access-via-radius-acs-5-x/

Regards,

Aditya

Please rate helpful posts.