How to configure SNMP in ISE 2.0

[Soo Hyun Cheong]

Dear All

I want to configure ISE for my NMS.

So how to configure ISE for add SNMP server.

My ISE version is 2.0.

Thanks

[jan.nielsen]

You need to SSH into the ISE servers and configure a snmp there to be able to poll the ISE from your NMS. https://www.cisco.com/c/en/us/td/docs/security/ise/2-0/cli_ref_guide/b_ise_CLIReferenceGuide_20/Cisco_ISE_CLI_Commands_in_Configuration_Mode.html#wp4380404450

[majid2386]

Hi Jan.Nielsen I to have cisco ise running in HA with 1.4.0 I don't think with the current version I can have the device in to monitoring. what trap are been added by cisco with 2.0 are the traps been supported like high cpu,disk usage, device reboot, etc.

[Zain Khan]

Hi,

this is very easy

take the SSH of your ISE

in global configuration mode enter the following command 

(config)# snmp-server community <string> ro //(where string can be any shared key which you entered on NMS to poll SNMP)

(config)#snmp-server enable

(config)#end