04-19-2022 02:59 AM
Hello.
As a title, I want to know the command for confirming the Log4j patch, which is installed on Cisco Identity Services Engine(ISE).
What kind of command can achieve that ?
I need to check above status after powering on and constructing ISE appliance.
# show ???
Solved! Go to Solution.
04-19-2022 03:26 AM
@Lucas Woo Login to ISE CLI run the command "show logging application hotpatch.log"
It should show that 'CSCwa47133_3.1.0.518_patch1' is installed, this will confirm that the hot patch was successfully installed.
04-19-2022 03:26 AM
@Lucas Woo Login to ISE CLI run the command "show logging application hotpatch.log"
It should show that 'CSCwa47133_3.1.0.518_patch1' is installed, this will confirm that the hot patch was successfully installed.
04-19-2022 03:37 AM
Hi Rob Ingram.
I could solve this problem with the way you told.
Thank you
04-19-2022 03:40 AM
Hi @Lucas Woo ,
beyond what @Rob Ingram said ... please take a look at your ISE version, the CSCwa47133 ISE Evaluation log4j CVE-2021-44228 was already solved on ISE 2.7 P7 and 3.0 P5,
Hope this helps !!!
04-19-2022 03:59 AM
Hi @Marcelo Morais
Thank you for additional comment.
ISE version I will set up is 2.7.0 and [CSCwa47133] was already installed.
I will check whether I have to install additional patch or not.
Your advice helps me a lot!
04-19-2022 04:09 PM
Hi @Lucas Woo ,
remember that Patch 7 is the latest patch for ISE 2.7 (ISE Software Download) and please take a look at ISE 2.7 EoL.
Hope this helps !!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide