How to enable Policy set mode in ISE release 2.4

[sujanya]

We are planning to perform the ACS 5.8 to ISE 2.4 migration. In the below documentation, pre-requisite is to enable the Policy set mode as per the below mentioned path.

choose Administration >
System > Settings > Policy Sets to enable the policy sets.

But In my ISE 2.4 box, I am not seeing the Policy set enable option in the above path.

Kindly let me know how to enable the policy set in ISE release 2.4.

[Rob Ingram · Accepted solution]

@sujanya Policy Sets were changed in ISE 2.3, they are already enabled - "All network access policies and policy sets, including authentication, authorization and exceptions, have now been consolidated together under the improved Policy Sets area, which can be accessed from Policy > Policy Sets."

https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/release_notes/ise23_rn.html#pgfId-762322

[marce1000 · Accepted solution]

 - Check if this guide can be useful : https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ISE_admin_guide_24/m_configure_and_manage_policies.html

 M.