cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

101
Views
0
Helpful
2
Replies
Highlighted
Beginner

How to enter the disk of ACS and create a new folder ?

Hi all

     Do you know how to enter the disk of ACS , create a new folder and write in some files?

I have to  "Add the following configuration to the file /usr/local/etc/tacacs.conf for the TACACS+ server to authenticate RBM" for the AAA authenticate

of Brocade, but it shows i must add that file to TACACS+  for authentication.

     How can i do that?   Type   mkdir disk:/usr/local        ?

My ACS version is 5.8

Thanks for your advise.

2 REPLIES 2
Highlighted
Participant

Have a look at this document

Have a look at this document to see if it helps:

http://blog.remembertheview.com/2015/09/01/setting-brocade-switches-tacacs-authentication-cisco-acs/

You don't need to create folders and edit configuration files directly even if you could.

Highlighted
Enthusiast

The instructions you

The instructions you reference seem to be meant for the open source tac_plus TACACS+ server.

For ACS, you'd configure a shell profile to pass back to the Brocade switch any custom A/V pairs that are needed.

This document has some examples for various third party devices:

http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/115926-tacacs-radius-devices-00.html

Javier Henderson

Cisco Systems