05-05-2016 12:32 AM - edited 03-10-2019 11:44 PM
Hi all
Do you know how to enter the disk of ACS , create a new folder and write in some files?
I have to "Add the following configuration to the file /usr/local/etc/tacacs.conf for the TACACS+ server to authenticate RBM" for the AAA authenticate
of Brocade, but it shows i must add that file to TACACS+ for authentication.
How can i do that? Type mkdir disk:/usr/local ?
My ACS version is 5.8
Thanks for your advise.
05-05-2016 01:04 AM
Have a look at this document to see if it helps:
http://blog.remembertheview.com/2015/09/01/setting-brocade-switches-tacacs-authentication-cisco-acs/
You don't need to create folders and edit configuration files directly even if you could.
05-05-2016 06:09 AM
The instructions you reference seem to be meant for the open source tac_plus TACACS+ server.
For ACS, you'd configure a shell profile to pass back to the Brocade switch any custom A/V pairs that are needed.
This document has some examples for various third party devices:
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-system/115926-tacacs-radius-devices-00.html
Javier Henderson
Cisco Systems
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide