08-30-2015 10:50 AM - edited 03-10-2019 11:00 PM
Hello,
I've currently setup PAN and MnT on the same hardware. How can I move MnT to a new hardware 3495?
Is there any link that I can refer to?
08-30-2015 02:26 PM
Actually it's quite simple :
1.Install the same ISE version and patches as you are running now, on your new appliance
2.Configure ip/mask/gw/dns/ntptimezone (timezone and dns domain/servers should be the same)
3.Register the dns name of the new appliance in your dns
4.Login to the new appliance web interface, and install a certificate that you will use for services (guest, eap, ise services)
5.Go to the first ISE appliance and register the new node, once thats done, you can select it to only have the monitoring as it's only service.
Done
08-31-2015 12:07 AM
Thanks, I'll try once the new box arrive. Any link that I can refer to?
08-31-2015 06:05 AM
It should be part of the regular installation guide, for the ISE version you are installing.
08-31-2015 07:28 AM
You can start here:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-4/admin_guide/b_ise_admin_guide_14/b_ise_admin_guide_14_chapter_011.html#ID276
Tim
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide