how to tacacs+ attribute on CS2.6

[mr.bond]

How to define the tacacs+ attribute in acs2.6 on windows.i need to define the ip address pool on it bcos the ipcp is not getting the ip address from the nas router when the user is registering the network after login.

[sghosh]

Hi,

You need to use "Group setup" and under "IP address assignment" section you need to select "Assigned from AAA Client pool " and enter the pool name which exists in the NAS.

Please make sure that user belongs to the above group or you can assign the pool name on a per-user basis also from "user setup".

Thanks

Sujit