How to use schedule to backup the log of 30 days in ISE

[may-ye]

We want to use schedule to backup log every 30 days in ISE

But we set the "On day" to 5, set "start date" to 2022-11-04, but we see the backup log only  between '2022-11-05 00:00:18.694' to '2022-11-05 16:59:55.888'.

How to use schedule to backup The log of 30 days in ISE ?

[Arne Bier]

I suspect that this is a browser issue - what browser are you using and what ISE version?

You have to select 'Monthly', and then a day of the month. If that day of the month is numerically greater than the current day, then select the next month.  If you don't see the Month and Year drop downs, then this is a browser issue.

In latest Chrome and ISE 3.0 patch 5 this works just fine. It's a notoriously buggy part of ISE in my experience. Cisco might want to re-work that interface design to be a bit more modern

[thomas]

@may-ye ,

I just tried it and got stuck on the calendar year selection not updating the End Date field.  8-(

I reported this to our UX lead.