cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1223
Views
0
Helpful
4
Replies
Highlighted
Beginner

Identify Patch Version in ACS for Windows 4.2

Hi guys,

I need to identify the correct patch Version in a Customer ACS for Windows 4.2

How can I do this task ?

In the about page I cannot find any reference to patch

My Best Regards,

    Andre Lomonaco

2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted

From my experience it will also tell you PATCH version as well, here is another thread that says to click on the Cisco logo, let me know if this works for you or not.

https://supportforums.cisco.com/thread/1003509

Thanks,

Tarik Admani
*Please rate helpful posts*

View solution in original post

Highlighted

Hi Lomon,

After login in to ACS application. You can click on the Cisco logo on top left... You can find the patch version.please refer the below screen shot.

Please do rate if the given information helps.

By

Karthik

View solution in original post

4 REPLIES 4
Highlighted
Advocate

Hi,

when you login, you should see the version information on the bottom of the screen.

Here is a screenshot of what you should expect:

http://www.google.com/imgres?um=1&hl=en&sa=N&biw=1680&bih=873&tbm=isch&tbnid=wrPQyogX64dw6M:&imgrefurl=http://www.security-solutions.co.za/cisco-acs3.3-cisco-acs4.2-migration-sequence.html&docid=pV4N0meDadyn0M&imgurl=http://www.security-solutions.co....

Tarik Admani
*Please rate helpful posts*

Highlighted

Hi Tarik,

Thanks for your reply. I agree with you that I can see the ACS Version.

But I couldn't see the ACS PATCH Version

Do you agree with me ?

Highlighted

From my experience it will also tell you PATCH version as well, here is another thread that says to click on the Cisco logo, let me know if this works for you or not.

https://supportforums.cisco.com/thread/1003509

Thanks,

Tarik Admani
*Please rate helpful posts*

View solution in original post

Highlighted

Hi Lomon,

After login in to ACS application. You can click on the Cisco logo on top left... You can find the patch version.please refer the below screen shot.

Please do rate if the given information helps.

By

Karthik

View solution in original post