Identity mappings in the Live Log

[michaellperrin]

Hi Folks,

I've enabled Identity mapping on ISE 2.0 and all of the mappings are showing up in my Radius Live Log.

Is there anyway to stop that? I know can use the filter, but It's annoying having to enter a filter every time I want to look at the log.

With lots of login/log off events from my DC the log is very busy.

Thanks

[nspasov]

Have you looked at enabling "Collection Filters" in ISE?

Administration > System > Logging > Collection Filters

I hope this helps!

Thank you for rating helpful posts!