cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

569
Views
0
Helpful
3
Replies
Highlighted

IE4000 "Command rejected: Platform does not allow the cli configuration" error

We're trying to configure trustSec on  IE4000.

version 15.2(4)EA5

IP services license

SDM profile - routing

 

After "cts role-based enforcement" command is executed we're getting notification:
"Command rejected: Platform does not allow the cli configuration"

Is anything more needed to run cts role-based enforcement? 

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Re: IE4000 "Command rejected: Platform does not allow the cli configuration" error

A reload is required when changing the template (and it has to be set to routing as stated in the case)

View solution in original post

3 REPLIES 3
Highlighted
VIP Collaborator

Re: IE4000 "Command rejected: Platform does not allow the cli configuration" error

Can you confirm that the feature is enabled? I know on nexus 7700 series gear you have to enable the feature via: #feature cts
Highlighted

Re: IE4000 "Command rejected: Platform does not allow the cli configuration" error

There is no such command in IOS.

Highlighted
Cisco Employee

Re: IE4000 "Command rejected: Platform does not allow the cli configuration" error

A reload is required when changing the template (and it has to be set to routing as stated in the case)

View solution in original post