cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1055
Views
0
Helpful
1
Replies
Highlighted

Inbound outbound or both with ISE dACL's

Hello Experts,

I've been doing testing on some dACL's we plan on utilizing within our environment.  I was curious to see how the dACL's work.

Will they be restricted to inbound traffic, outbound traffic or both? 

A basic questions I should had asked a while ago so any help on this subject would be greatly appreciated.

Thanks,

-Robert

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Re: Inbound outbound or both with ISE dACL's

dACL is applied inbound. There are other types of ACL that can be applied for either direction. Please see: 802.1x DACL, Per-User ACL, Filter-ID, and Device Tracking Behavior - Cisco

View solution in original post

1 REPLY 1
Highlighted
Cisco Employee

Re: Inbound outbound or both with ISE dACL's

dACL is applied inbound. There are other types of ACL that can be applied for either direction. Please see: 802.1x DACL, Per-User ACL, Filter-ID, and Device Tracking Behavior - Cisco

View solution in original post