06-01-2012 06:37 PM - edited 03-10-2019 07:09 PM
hi,
i would like to increase the disk space for Vmware based cisco ise to 600gb.
Increasing the raw disk space is fine on VMware, but how will the ISE or Linux OS modify the partition to recognise the extra disk space
thank
06-24-2012 01:42 AM
This will not work. The best thing to do is to take a backup of your ISE configuration on an ftp server and then rebuild the environment.
Thanks,
Tarik Admani
12-13-2012 02:24 PM
And what will happen if you have it lincensed? Will you need to create a new license file? or the PID comes with the backup file?
regards,
12-13-2012 08:29 PM
You may need to build the new ACS instance and have the licenses rehosted. I cant remember if the serial number of the virtual machine is needed when licensing ACS. If the serial number isnt needed, then yes you should be able to restore the database on the new environment.
Thanks,
Tarik Admani
*Please rate helpful posts*
11-03-2013 12:55 PM
Refreshing an old thread, but I was faced with this recently.
If you're prepared to roll up your sleeves with Linux, I've figured out a procedure. In my case I couldn't rehost the license since it's an NFR version - and yes Tarik is correct a restore doesn't bring in the license.
Some instructions here.
http://communities.labminutes.com/security/ise-expanding-the-data-partition/
06-28-2018 10:37 AM
Hi, is now 2018 VM like ISE 2.3, 2.4 will support add disk space.
or that is imposible to increase size unless play around with the merging stuff.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide