cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1191
Views
1
Helpful
2
Replies

Infoblox and Cisco ISE 2.3

ymadheka
Level 4
Level 4

Hi Team,

Do we have the same steps that are provided on this link (How-to Integrate Infoblox and Cisco Identity Services Engine (ISE) using Cisco Platform Exchange Grid (pxGrid)) with ISE v2.3.

Kindly suggest for any changes if required.

1 Accepted Solution

Accepted Solutions

jeppich
Cisco Employee
Cisco Employee

Hey Yogesh,

Can you email me directly, i will send you additional steps with regards to using ISE 2.3 and the internal CA.  Also the EPS policy is not GUI driven in ISE 2.3 and above.

Thanks,

John

jeppich@cisco.com

View solution in original post

2 Replies 2

jeppich
Cisco Employee
Cisco Employee

Hey Yogesh,

Can you email me directly, i will send you additional steps with regards to using ISE 2.3 and the internal CA.  Also the EPS policy is not GUI driven in ISE 2.3 and above.

Thanks,

John

jeppich@cisco.com

Hi John,

Not able to reply on the ISE community (attached is the error), have sent you a one-to-one mail..

Thanks & Regards,

Yogesh Madhekar

Cisco Systems India

H/ P : +91 99308 63027 | Desk: +91 22 40011205 | ymadheka@cisco.com<mailto:ymadheka@cisco.com>